manualshive.com logo in svg

Kodak DryView 8100, Руководство пользователя, Страница: 2 / 75

Поделиться
Скачать
Kodak DryView 8100 Скачать руководство пользователя страница 2

Safety, EMC, and CE Marking Compliance

i

2000 March Rev. B    8754020

Safety, EMC, and CE Marking Compliance

Read and understand all instructions before using.

For a translation of the following warnings, please refer to the applicable safety
addendum listed below:

DryView 8100 Imager User Guide Safety Addendum (Polish) 74-0500-5507-3

DryView 8100 Imager User Guide Safety Addendum (Hebrew) 74-0500-5508-1

DryView 8100 Imager User Guide Safety Addendum (Korean) 74-0500-5509-9

!

WARNING

 

This equipment is operated with hazardous voltage which can shock,
burn, or cause death.

Remove wall plug before servicing equipment. Never pull on cord to remove from
outlet. Grasp plug and pull to disconnect.

Do not operate equipment with a damaged power cord.

Do not use an extension cord to power this equipment.

Use only the power cord supplied with this equipment.

Position the power cord so it will not be tripped over or pulled.

Connect this equipment to a grounded outlet.

!

WARNING

This equipment contains moving parts that may be accessible to the user. Loose
clothing, jewelry, or long hair may cause minor personal injury or damage to the
equipment. Do not operate equipment with the covers open. Do not operate
equipment with any of the safety interlocks overridden.

!

WARNING

This equipment is not contained in a sealed cabinet. Therefore it must not be used in
locations where it can come in contact with liquids, including bodily fluids.

!

WARNING

For continued protection against fire, replace fuses only with fuses of the same type
and rating.

Содержание DryView 8100












































































Отзывы:

Нет отзывов