80
Chapter 10
In Review mode,
a blue screen is
displayed instead
of a picture.
The picture has no
thumbnail or an
unrecognized
thumbnail.
Transfer the picture to the
computer (
page 65
), or delete the
picture (
page 43
).
Picture is not
clear.
The lens is dirty.
Clean the lens (
page 98
).
Subject too close when
taking picture.
Move so there is at least 19.7 in.
(50 cm) between the camera and
the subject.
Subject or the camera
moved while the
picture was taken.
Place the camera on a flat, steady
surface or use a tripod.
The subject is too far
away for the flash to be
effective.
Move so there is no more than
12.8 ft (3.9 m) between the
camera and the subject.
Slide show does
not run on
external video
device.
Video Out setting is
incorrect.
Adjust the camera Video Out
setting (NTSC or PAL,
page 59
).
External device is set
incorrectly.
See the external device’s user’s
guide.
Camera freezes
up when a card is
inserted or
removed.
Camera detected an
error when the card
was inserted or
removed.
Turn the camera off, then back
on. Make sure the camera is
turned off before inserting or
removing a card.
Problem
Cause
Solution
