68
Chapter 9
Installing the Custom Camera Insert
A
universal insert
is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A
custom insert
is included with your camera. It provides a perfect fit for
your Kodak EasyShare CX6230 zoom digital camera.
Remove the Universal Insert
1
Place your thumbs in the indents in the
front of the universal insert; press in and
lift.
2
Lift the insert at the side edge and remove
the insert from the dock.
3
Save the universal insert as a spare.
Install the Custom Insert
1
Position the custom insert so the cutout
lines up with the connector on the camera
dock.
2
Fit the insert into the groove in the dock and
snap it into place.
You can purchase a custom insert for your
camera at a dealer of Kodak products. See
www.kodak.com/go/cx6230accessories
.
Cutout
Connector
