A-61627 June 2010
2-3
Getting your
documents ready
1. Standard paper size documents feed easily through the Scan
Station. When organizing your documents for scanning, stack the
documents so the lead edges are aligned and centered in the input
tray. This allows the feeder to introduce documents into the Scan
Station one at a time.
2. Remove all staples and paper clips before scanning. Staples and
paper clips on documents may damage the Scan Station and
documents.
3. All inks and correction fluids on the paper must be dry before
scanning is started.
Using the Scan
Station
1. Place the documents you want to scan in the input tray of the Scan
Station. Be sure the front side of your document(s) is positioned
against the input tray and the top of the document(s) is inserted into
the input tray first (see below). Two-sided documents are scanned in
one pass.
NOTES:
•
Depending on how your Scan Station is configured, you may be
required to enter your user name, password and domain to login.
•
If you are required to login to your Scan Station at the end of your
scan session, press the
Stop/Logout
button (red X) on the front of
the Scan Station to logout.
