Kodak 2400DSV-E, Руководство оператора

Страница: 70 / 73

B-2 A-61316 September 2004
System Setting Selection Default Description
Auto skew correction
retain Retained
Not
Retained
Not
Retained
Determines whether or not to retain the original
(uncorrected skew of a screen image after the print has
been made).
Machine ID Printing
(High-speed Video Laser
Printer only) Disabled
Pattern 1
Pattern 2
Disabled
When two scanners are connected to one printer, this
function leaves an identification marker on the print so
the scanner used for the job can be determined after
printing.
Pattern 1 Pattern 2
Paper Paper
Cycle print mode
(PR mode only) Enabled
Disabled
Disabled
This function automatically scans the next image
following a preset period of time (the period can be set by
your Kodak Service Representative). Images are set by
the user onto the Carrier Glass between cycles.
Paper size of Paper
Feeding Tray
(High-speed Video Laser
Printer only) Lengthwis
e
Crosswise
Crosswis
e
Determines the desired paper size from the Paper
Feeding Tray of the printer.
Contrast setting Lighter
Normal
Darker
Normal
To view subtle images with standard ranges of density
clearly: Light (-1 to -7). To bring out the darker and lighter
ranges of an image: Dark (+1 to +7).
The print function at the
time of Toner Empty
detection (PR mode only) Disable
Print
Enable
Print
Disable
Print
After a toner empty condition is detected, this function
allows you to select either to stop printing or continue
printing.
Auto Film Format Select
Print function
(PR mode only) Enabled
Disabled
Enabled
The Auto Film Format Select Print function is enabled or
disabled through the control panel. This function is used
for managing horizontal and vertical printing when letter-
or A4-sized paper is set crosswise/lengthwise into the
paper feeding tray/paper feeding cassette.
90 degree rotation setting Enabled
Disabled
Disabled
Enables the prism to rotate the screen image 90 degrees.
Automatic paper source
switching (High-Speed
Video Laser Printer only) Auto
switching
Disabling
Auto
switching
Auto
switching
Allows you to specify the paper source when letter- or
A4-sized paper is loaded in lengthwise or crosswise
orientations into the paper feeding tray and paper feeding
cassette.
Auto switching: printing continues by automatically
switching to the reaming paper source after paper in the
specified paper source runs out.
Disabling Auto switching: a paper empty mode occurs
and printing stops after paper in the specified paper
source runs out. The paper source must be refilled or the
paper source must be switched by pressing the Output
Selection key to resume printing.