Kodak 2400DSV-E Скачать руководство пользователя страница 13

Страница: 13 / 73

A-61316 September 2004

1-9

Turning the power on
and off

Following are illustrations and procedures of turning the power on and off
of the scanner, the video laser printer.

To turn the power on:

•

Press the Power switch of the scanner and printer to the On (I) position.

2400DSV-E Scanner

Video Laser Printer

When the scanner is turned on, the Control Panel displays a blinking “1”.
When the scanner is ready, the “1” stops blinking.

NOTE: If you load the film in the film carrier and press the Start button

while the printer is warming up, you can scan and memorize the
film image of about 9 pages (Letter or A4 size/400dpi). The Printer
allows that print process to be started as soon as the printer
completes warming up.

Darker

Auto

Lighter

Both ends of Exposure Display blink. If you want the Print
Reserve/Memory Function disabled, contact your Kodak Service
Representative.

To turn the power off:

•

Press the Power switch of the scanner and printer to the O (Off)
position.

NOTE: The power to the scanner and printer can be turned On and Off at

the same time by using a cord that is equipped with an on/off
switch saving both time and energy.

Make sure that all cords used

comply with the specified ratings of the unit.

Содержание 2400DSV-E










































































Результаты поиска

Содержание 2400DSV-E

Отзывы:

Бренды по названию

Популярные бренды

Kodak 2400DSV-E, Руководство оператора

Результаты поиска

Содержание 2400DSV-E

Отзывы:

Бренды по названию

Популярные бренды