6
Line up the holes on the Mounting Bracket with the holes on your outlet box.
Using the two Mounting Screws or fit the outlet box. Ensure the ‘FRONT’
marking is at the front after installation.
WARNING: Risk of electric shock. Disconnect power at fuse or circuit breaker
before installing or servicing.
CAUTION: Do not cut any wires with factory installed wire connectors or remove
the wire connectors.
• Take the outlet box wires through the hole in the Mounting Plate .
• Place the Mounting Plate against the outlet box.
• When mounting to a wall, the “UP” arrow must point upward.
• When mounting to an eave, the “UP” arrow must point toward the building.
• Insert the Mounting Bolt through the mounting plate hole in the middle, and
Mounting Bracket hole. Tighten the Mounting Bolt securely.
• Firmly pull on the Mounting Plate to verify it is securely attached to the
Mounting Bracket .
STEP 1. INSTALLING THE MOUNTING BRACKET
INSTALLATION
STEP 2. INSTALLING THE MOUNTING PLATE
Note:
Do not mount this Security Floodlight on the ground. Important notes:
1. Environmental temperature affects the sensor range. It is recommended not
to mount the fixture near a heat source like an air conditioner, vent or furnace
exhaust, or in a direction facing a light reflecting object.
2. The sensor will be more sensitive to motion across its detection path than
motion coming directly towards it.
3. For best performance, gently clean the lens with a soft cloth every two months
to assure maximum sensitivity.
PE
PF
PF
PG
PG
PB
PB
PB
PD
PD
PD
PD
PD
PE
PE
PE
PE
or
PE
