3
CAUTION: RISK OF PRODUCT DAMAGE
• Never connect components under load.
• Do not mount or support these fixtures in a manner that can cut the outer
jacket or damage wire insulation.
• Avoid covering LED fixtures with insulation, foam, or other material that will
prevent convection or conduction cooling.
• Never connect an LED product directly to dimmer packs, occupancy sensors,
timing devices or other related control device, unless individual product
specifications deem otherwise.
• Do not exceed fixture’s maximum ambient temperatures.
• LED products are Polarity Sensitive. Ensure proper polarity before installation.
Electrostatic Discharge (ESD) can cause damage to LED fixtures. Personal
grounding equipment must be worn during all installation or servicing of
the unit.
• Do not tamper with or attempt to repair the LED component or fixture. The
light source is designed for this specific application and should not be
serviced by untrained personnel. Contact the customer service department if
any servicing is required.
CAUTION: RISK OF INJURY
• Wear gloves and safety glasses at all times when removing fixture from carton,
installing, servicing or performing maintenance.
• Avoid direct eye exposure to the light source while it is on. LED LAMPS ARE
EXTREMELY BRIGHT. UNDER NO CIRCUMSTANCES SHOULD YOU STARE
INTO AN LED BEAM, THIS MAY CAUSE IRREPARABLE DAMAGE TO THE EYE.
• Account for small parts and destroy packaging materials, as these may be
hazardous to children.
WARNING: RISK OF BURN
• Allow fixture to cool before handling. Do not touch enclosure of light source.
• Do not exceed the maximum wattage marked on the label.
• Keep combustible and other materials that can burn away from the luminaries,
fixture and lamp/lens.
