5
PRODUCT SPECIFICATIONS:
1. Operating Voltage: 120 Vac, 60 Hz
2. Wattage: 44 W
3. Light Output: 3000 lumens
4. Color Temperature: 5000 K
5. LED Life Cycles: up to 50,000 hours
6. Operating Temperature: -20°C to 40°C / -4°F to 104°F
INSTALLATION PROCEDURES:
Before beginning assembly of the product, make
sure all parts are present. Compare parts with
package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated assembly time: 30 minutes.
Note: It is recommended that a qualified licensed
electrician perform all wiring connections. The electrical system and the method
of electrically connecting this fixture to it must be in accordance with the National
Electrical Code and local building codes.
• Install the motion sensor between 6.2 ft / 1.9 m and 9.8 ft / 3 m above the
ground. Motion sensor is less sensitive above 9.8 ft / 3 m.
• Mount sensor away from heat producing sources to prevent false triggering.
Be very careful not to include objects such as windows, white walls and
water in the detection zone.
• Mount fixture away from moving objects such as trees and street traffic.
• Suitable for wall mounting or eave mounting.
MOUNTING LOCATIONS
• Determine the mount location, such as a
wall or eave
• The motion sensor needs to face the
ground and the light should have
“THIS SIDE UP” facing upwards.
• Position the triple-head LEDs in the
general direct of the desired light coverage.
• If needed, lift the motion sensor up and
down so the control faces the ground
after installation.
8.7
IN
/
22.1
CM
11.8 IN / 30 CM
5.6 IN / 14.4 CM
Sensor detects motion that
moves across the detection zone
