�
Button
Door opens when this
button is pressed.
Available only for
the door equipped
with door opener.
�
Button
To confirm visitor
without holding
the handset
�
Button
To call and commu-
nicate with other
monitor or doorphone
PLAY
AUTO
TIMES
REC
REC
■
■
KVM-524RG Monitor
Name of each part
�
Handset
To communicate with
door camera.
Manual/Auto recording
�
Lamp
�
�
Power Lamp
To check power
ON/OFF status
�
4 inch screen
To identify visitor
�
Brightness Control
Knob
To control brightness
of monitor screen
�
Contrast Control Knob
To control contrast of
monitor screen.
Call Signal
�
Volume Control Knob
�
To control calling
�
signal volume.
�
Time mode Button
�
To select the month,
�
time..etc.
�
Time set Button
�
To set up the
�
month, time..etc
�
Mamual Rec. Button
�
Can record visitor
�
on purpose
�
Auto-Rec. Button
�
To record all visitor
’
s
�
image automatically
�
when you absent
�
Play Button
�
Can confirm recording
�
images in order
�
■
■
KC-D20 Metal Pinhole Camera & KC-B61 Camera
�
C-Mic
To communicate
with Monitor
�
C-Mic
To communicate
with Monitor
�
Power Lamp
To check power
ON/OFF status
�
Speaker
When visitor calls,
the voice from monitor
comes out of the speaker.
�
Speaker
When visitor calls, the
voice from monitor comes
out of the speaker.
�
Call Button
By pressing the button, the
related house will be called.
�
Camera Lens
Clear picture quality realized
by adopting 1/3" CCD
PLA
Y
AUT
O
TIM
ES
REC
REC
PLA
Y
AUT
O
TIM
ES
REC
REC
Basic Installation method of Monitor
When system is attached to 1 rectangular switch box
��
Standard height monitor
Wall hanger
panel for
fixing Monitor
Screw
Wall
Wall hanger panel
for fixing Monitor
1 Rectangular
switch box
�
Standard height of monitor is ranged 1,450 ~ 1,500
from bottom to the center of monitor screen.
�
For installation, avoid the places where there is any
excessive humidity,magnetic force, dangerous
chemicals, direct ray of sun, and any places near a
heater which can cause break down.
Monitor Installation
(unit:mm)
Screw
Bottom of
1 Rectangular
switch box
Center of monitor
��
KC-D20 Surface-mounting Door Camera Installation
After attach the body supporter with 2 screws,
put the Door Camera into the grooves of body supporter,
and then fix it with 2 screws and stick the finishing materials.
Straight Ahead Installation
��
Standard Height of Door Camera
�
Standard height of the door camera is 1,400mm
�
1,450mm from the bottom of one camera to the floor.
�
In case that the height of Door camera exceeds the range of min. 1,250mm
�
1,550mm, it is impossible to control
the screen picture with only the lens angle, and therefore, be careful of the height of camera installation.
(unit:mm)
Door camera Installation
Bottom base of
One hall Box
Surface mount
Flush mount
