�
�
Identifying and talking to visitors
3.After communication replace handset. However, if conversation continue more than
3minutes, monitor screen is turned off automatically. And if you want to communicate
more time, press button again.
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
2-1 Hold handset and identify visitor.
Then, communicate with visitor. And,unless you replace handset within 3minutes, the
monitor screen is turned off automatically.
2-2 When the handset is held on and the call is made from the camera, press button
on the monitor. then communicate with visitor.
2-3 While communicating with camera, if the internal call is made from the extended
monitor or doorphone, the beep signal sounds in 5 sec. and disconnected with the camera
automatically Then you can communicate with extended monitor or doorphone after
pressing button on the monitor.
1.Call signal rings from the monitor, while screen is
turned on and visitor is appeared automatically.
When visitor presses the call
button of door camera.
How to operate (Instruction for operating)
�
�
Time Setting
1. Turn on the monitor’s screen as pushing camera1 or camera 2 button
2. Press “Time Mode” (for 2 seconds), then appears “Time Mode” at the center of monitor’s screen
and “Minute” is on the blink.
3. Change the number as pushing “Time set”button & Select wanted number with “Time Mode”
button. As like above method, set time & date continuously (minutes -> time -> date -> month ->year).
4.‘REC’ button :Down-Count , “ Time set” button:Up -Count
�
�
Manual Record & Auto Record
�
�
Play Recorded Image
1. Manual Record :
Please choose monitor image as pushing“Camera 1” or ‘Camera 2’ button.
And then the image will be recorded when you push ‘REC’ button.
2. Auto Record :
If you push ‘AUTO-REC’ button, the green LED lamp will turn on and the
images will be recorded with blinking red color LED automatically when push camera’s call button.
(Auto-recording. is not available within 30 seconds after recorded)
If you push ‘Play’ button , you can find one cut image with time in order from the latest images.
It’s not available with auto re-play for all images by one touch.
※
In the case of full recorded images, it will be removed from the oldest image in order.
�
�
Opening front door automatically
After communication with visitor, press door key button. Then, the door is opened automatically.
REC
TIMES
AUTO
REC
PLAY
1. For this purpose, automatic AC doorlock should be first
installed on the door and then connected with video doorphone
2. After communication with visitor, press button,
and the door is automatically opened
��
Checking out door side - Don’t need to hold handset
��
Identifying visitors
1. If press button on the monitor, screen is turned on
automatically. And, you can check out door side.
2. After checking, screen is turned off as pressing button again.
3. After internal call is made, the monitoring is not availalle for 60 sec.
4. Monitoring when 2 cameras are connected.
-Using hanset
If the handset is picked up, press button shortly in order to
change the camera.
-Without using handset
Camera 1selection : press button shortly
Camera 2selection : press button a little longer, till screen is on.
1. If press call button on the door camera, the screen is turned
on automatically. And, you can check out door side.
2. At this time, you can easily identify visitors without lifting
handset. ( After 60sec., Monitor screen is turned off
automatically)
��
Opening door automatically (Regardless of handset status)
��
Internal call and intercom function
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
PLAY
AUTO
TIMES
REC
REC
When additional monitor and door phone are connected to the monitor.
as doorphone has no security function, the conversation between 2 monitors
can be heard from the extended doorphone without notice.
※
※
Caution
Hold on handset and press button on the monitor.
Then the call signal sounds from the extended monitor or doorphone.
And if it is answered from the extended monitor or doorphone you can
communicate.
In case the handset of the extended monitor is held on, and button
on the extended monitor is pressed, you can communicate.
During internal communication, if the call is made from the camera, the beep signal sounds in a sec. and the
call signal from the camera sounds.
At same time the monitor is disconnected automatically with extended monitor or doorphone
Then if you press button on the monitor, you can talk with visitor
