22
23
Use of the microphone with SK 100 G3 transmitter
1. SK 100 GR transmitter can be used with a microphone
(headset, clip-on). To connect the microphone and
transmitter, connect the microphone’s 3.5 mm jack plug
(15) to the transmitter’s jack socket MIC/LINE (1). Lock
the jack plug by screwing down the coupling ring (16).
2. Switching the transmitter ON/OFF:
To switch on the transmitter
, simultaneously
press on both catches of the battery
compartment cover (11) and open the cover.
Press the ON/OFF button (13). The transmitter
begins to transmit an RF signal, the red LED
lights up (4) and name and frequency of the
transmitter appear on the display panel. RF
transmission icon (4) is displayed.
To switch the transmitter off
, press and hold
the ON/OFF button until “OFF” appears on the
display panel. The red LED and display panel
turn off.
3. If transmitter is switched on but it does not connect with the Kolibri system, it is possible
the transmitter is set at a wrong frequency or RF signal transmission is locked. Reset the
transmitter to a correct frequency and check the RF signal transmission.
To
deactivate the RF signal
, press the ON/OFF button until “
RF Mute Off
”
appears on the display panel. Then press the rocker button so the “
RF Mute On?
”
is displayed. Confirm with the SET button (7). The transmission icon (4) is no longer
displayed.
To
activate the RF signal
, press the ON/OFF button until “
RF Mute On
” appears
on the display panel. Then press the rocker button so “
RF Mute Off?
” is displayed.
Confirm using the SET button (7). Transmission icon (4) appears on the display
panel.
15
16
1
11
10
11
13
4
4
7
