20
Battery replacement
Only use 1.5 V AA batteries for the hand-held microphone or clip-on/headset
microphone transmitter!
To insert batteries in the hand-held microphone, unscrew the lower part of the
microphone by turning it counter-clockwise (3). Slide downwards the lower part of
the microphone as far as it goes. Open the battery compartment cover (13) and
insert the batteries while observing the correct polarity! Close the battery compart-
ment cover and push the battery compartment cover upwards, screwing it onto the
microphone’s body.
3
1
2
4
5
6
7
8
9
10
11
11
12
13
14
6
13
13
3
Presentation of the Transmitter SK 100 G3
1. Microphone input (MIC/LINE), 3.5 mm jack
socket
2. MUTE switch
3. Antenna
4. Operation and battery status indicator, red LED
(transmitter on), flashing red LED (low battery)
5. Audio over modulation indicator yellow LED (AF
PEAK)
6. Charging contacts
7. Settings button (SET)
8. Rocker button (up/down)
9. Battery compartment
10. Battery compartment cover
11. Battery compartment catches
12. Infra-red interface
13. ON/OFF button, serving also as an
ESC/CANCEL key in the menu
14. Display panel (backlit in orange)
