20
21
When unscrewing the lower part of the hand-held microphone during operation,
the muting function is automatically activated (“MUTE” appears on the display
panel). When you close the lower part of the microphone, muting is automatically
cancelled.
In SK 100 G3 transmitter, the batteries are replaced by simultaneously pressing
on both catches of the battery compartment cover (11) and open the cover (push
upwards). Observe correct polarity when inserting the batteries! Close the cover by
pressing it in the middle (10) until it locks into place.
Use of the SKM 100-835 G3 hand-held microphone
1.
2. Switching the microphone ON/OFF:
To
switch the microphone on
, press the ON/OFF
button (12). The microphone begins to transmit an
RF signal, the transmission icon (4) is displayed, and
the red LED lights up (9). Name and frequency of the
microphone appear on the display panel.
To
switch the microphone off
, press and hold
the ON/OFF button (12) until “OFF” appears on
the display panel. The red LED (9) goes off and the
display panel turns off.
Always hold the hand-held microphone at
the centre of the handle, and not at the
lower part where the antenna is located (7)!
Holding the microphone by the antenna
might cause sound disturbances! Hold
the microphone as close to your mouth as
possible.
11
10
10
7
12
9
