HND-P210
page 6
HND-P210 K08/0422
8. Start of Operation
8.1 Connections
Connection for pressure sensors of the HND-P-family
Interface: Connection for el. isolated interface adapter
(see chapter
8.7 The Serial Interface
)
The mains adapter socket is located at the left side of the
device.
8.2 Display
8.3 Basic Operation
When switching on
the device and the logger function is not off the time of the
integrated clock will shortly be displayed. Furthermore the kind of measuring is
displayed (Slo/Fast/P.det, p.r.t 2.1) and “Corr”, if a Sensor with activated offset or
scale correction is connected.
After changing the battery
the clock-setting menu is activated automatically
(‚CLOC‘). Check the clock and adjust, if necessary (see chapter 8.4
Configuration
).
Tare Function:
By pressing ´Tara´ (key 3) the display will be set to 0. All
measurings from then on will be displayed relatively to the set
tare value. When tara function is activated, the arrow "Tara"
appears in the display. To deactivate tare function press
´Tara´ for >2 seconds.
Please Note: Activating/deactivating tara clears the max- & min-
memories.
