HND-P210
page 12
HND-P210 K08/0422
- time and date of the recording
After each recording „St. XX“ will be displayed for a short time. XX represents the
number of the recording.
If logger memory contains recordings already:
When „Store“ is pressed for 2 seconds, the choice for clearing the logger memory
will be displayed:
Clear all
recordings
Clear the last
recording
Clear nothing
(cancel menu)
The selection can be made by
(key 2) and
(key 5). "Quit" (key 6) enters the
choice.
If the logger memory is full, the display will show:
Viewing Recorded Measurings
Within the „LoGG Stor“ function the measurings can be viewed directly in the
display not only by means of a computer (like at „Func CYCL“): press 2 seconds
„Set“ (key 4): The first menu displayed now is „rEAd LoGG“ (read logger data).
After pressing
(key 3) the measurement recorded last will be displayed,
changing between the different values referring to the measurement also is done
by pressing
.
Changing the measurement is done by pressing the keys
or
.
8.6.2
„Func-CYCL“: Automatic Recording With Selectable Logger-
Cycle-Time
The Logger-Cycle-Time is settable (p.r.t. Configuration). For example „CYCL“ =
60: A measuring is recorded after each 60 seconds.
When the slow measurement "rAtE-Slo" is chosen, additionally a low power
function is available: „Lo.Po“.
If „Lo.Po“ is on, the device only will take a measurement at the point of time of the
recording. In between the recordings the measuring shuts down. This decreases
the power consumption enormously and therefore is recommended e.g. for long
time recordings where no mains adapter is available.
Max. number of measurings: 10000
Cycle time: 1...3600 seconds (=1h), selectable in the configuration
A measuring contains:
rAtE SLo:
- current measuring value at the time of recording
- min peak, max peak since the last recording
rAtE FASt,P.dEt
- arithmetic mean value since the last recording
- min peak, max peak since the last recording
