Heinrichs Messtechnik GmbH
Page 4
Betriebsanleitung KDS/BGK
1
Introduction
This installation and operating manual explains how to operate, install and perform maintenance on the
flowmeter. Please read the manual carefully before installing the device and putting it into operation. The
manual does not apply to non-standard versions or applications.
All devices are thoroughly tested and checked for order compliance prior to shipping. Upon receipt of the device,
check it for transport damage.
If any problem comes to light, contact our head office in Cologne. Please describe the problem and indicate type
and serial number of the device. We extend no guarantee of any kind for repair work that is undertaken without
notifying us in advance of the intention to carry out such work. Unless otherwise agreed, any part or component
for which a claim is lodged is to be sent to us for examination.
2
Safety instructions
2.1
Installation, start-up and operating personnel
Only trained specialists authorized by the system operator may carry out the installation,
electrical installations, start-up, maintenance and operation. They must read and understand
the operating manual and follow its instructions.
Follow the conditions and provisions applicable in your country.
Heinrichs Messtechnik GmbH accepts no liability for any loss or damage of any kind arising from improper
operation of any product, improper handling or use of any replacement part, or from external electrical or
mechanical effects, overvoltage or lightning. Any such improper operation, use or handling shall
automatically invalidate the warranty for the product concerned.
2.2
Intended use
The KDS or BGK variable-area flowmeters may be used only for flow measurements of non-viscose fluid and
gaseous media. The manufacturer shall not be liable for damages that may result from improper or unintended
use.
The operator carries the sole responsibility for suitability of the device for its intended use. The manufacturer is
not liable for damage caused by improper or non-intended use. Usage of the device other than intended will also
lead to loss of guarantee.
When dealing with an aggressive medium, clarify the material durability of all wetted parts.
When using the device in hazardous areas, follow the applicable national installation rules (see also Section 0
“Use in hazardous areas”).
