Heinrichs Messtechnik GmbH
Page 28
Betriebsanleitung KDS/BGK
18
Standards and directives
Directive 2014/68/EU (PED directive - Pressure Equipment)
-
Production in accordance with AD 2000 guidelines and HPO approval (TRB200/TRD201)
-
TÜV approval for welding requirements in accordance with EN ISO 3834-3:
-
Measuring range rated and converted to other products according to guidelines VDE/VDI 3513
Directive 2014/34/EU (ATEX Directive)
-
DIN EN ISO 80079-36 Non-electrical equipment for use in potentially explosive atmospheres – Basic
method and requirements
-
EN 60079-0
- General requirements
-
EN 60079-11
- Intrinsic safety „i“
Directive 2014/30/EU (EMC Directive)
-
EN 61000-6-2
- Immunity industrial environment
-
EN 61000-6-3
- Emitted interference residential environment
-
EN 55011
- Group 1, Class B
-
NAMUR recommendation NE 21
Others:
-
EN 60529
- Degrees of protection through housing (IP code)
-
EN 61010-1
- Safety requirements for electrical measuring, control and laboratory devices
-
EN 60947-5-6
-
Low-voltage switchgear and controlgear
19
Order information
Please include the following information in your order:
Product data, specific weight, temperature, pressure, viscosity, material design, connection size, measuring
range, desired accessories, required approvals and material certificates
20
Maintenance
The device requires no maintenance if used according to its intended purpose. However, if cleaning is necessary
to remove dirt from the measuring ring or the float, take note of the following aspects:
-
Before removing a device, make sure that the pipeline is free of the product, is pressureless and has cooled
down.
-
Fittings with the insides coated may be carefully cleaned after removal with a brush and the appropriate
cleansing agent.
