Kobold DSS -11, Руководство по эксплуатации, Страница: 6 / 36

DSS
Page 6 DSS K08/0322
BN
BU
Ex-contact N/O
7.2. Ex-Contact with Cable Connection
Special conditions for a safe application

The connection of the solenoid switch must be carried out in housings which
correspond to a standardized ignition protection class in accordance with EN
50014, 1.2.

The short-circuit current I
k
of the supply source must not exceed 5 A.

The switch is suitable for an ambient temperature area of -20...+70 °C.
General

Make sure that the supply wires are de-energized.

Mount supply line to the connecting cable as shown in the wiring diagram.

If the contact has not been adjusted, adjust it now. (see section 9.
Commissioning)
Attention! The specified electrical values for the sealed contact
should not be exceeded even for short periods. We recommend
contact protection relays or other contact protection device for
higher switching values.

When the external devices have been connected to the limit contact and the
switch point has been set, the electrical connection is complete.

The instrument can now be put into operation now.
7.3. Examples of contact protection devices
For capacitive and inductive loads (long leads and relays/contactors) we
recommend contact protection relays or the following suppressor circuits.