Koblenz BP-1400, Руководство по обслуживанию и список запасных частей

Страница: 6 / 10

VI.- OPERATING INSTRUCTIONS
Please read the following operating instructions
carefully. They will help you to get the best
performance from this professional quality vacuum
cleaner and to maintain it in optimum condition.
Follow these simple steps for easy and
effective
operation of the Backpack vacuum.
Open the lid and ensure that the cloth bag is
correctly located and the flexible ring provides a
proper seal when the lid is closed. For optimum
filtration and maximum hygiene, it is advisable to
use a paper vacuum bag in addition to the
standard cloth bag.
If you use a paper vacuum bag, simply insert it into
the cloth bag, making sure that the cardboard disk
is centered on the flexible sealing ring.
When you replace the lid, the short nozzle in the
center of the lid will be forced into the central hole
of the cardboard disk of the paper vacuum bag
thus providing a tight seal. Make sure the paper
vacuum bag is tightly secured over the short
nozzle before vacuuming.
Lock the lid down with the two latches. Always
ensure that the vacuum bag is empty before
vacuuming. Your Backpack vacuum has been
fitted with a thermal overload switch to protect the
motor against damage should the airflow be
blocked for extended periods. This may occur if the
vacuum bag is overfull or if the vacuum hose is
blocked. The vacuum motor will stop before it can
get too hot. If this happens, empty and thoroughly
clean the vacuum bag or free any blockage and
ensure that adequate
airflow is restored. The motor will automatically
restart after it has
cooled to a safe operating temperature.
1. The vacuum hose is fitted into the cuff in the lid.
It should not be necessary to remove the hose in
normal operation.
2. Place the Backpack vacuum on your back,
adjust the shoulder straps until you feel
comfortable and then tighten the waist belt. The
Backpack vacuum is designed to ride higher on
your back for maximum comfort.
3. Plug the cord into a 120 volt, grounded outlet.
Always unwind the cord completely before
vacuuming. It is important to maintain the power
cord in good condition. This unit ships with a 50'
16AWG x 3 conductor
SJT extension cord. Always use a 16x3 SJT
extension cord when
operation this unit. Use care when pulling the cord
around sharp
edges and through doorways
Never operate the Backpack vacuum if the
power cord is damaged in any way.
4.
Attach the extension wand to the hose and fit
the floor tool or
any of the other vacuuming accessories on the
wand.
5. Turn the vacuum on. The toggle switch is
located on the switch box.
You may clip the switch box to the waist belt.
6
APRIL-09