Koblenz BP-1400, Руководство по обслуживанию и список запасных частей

Страница: 7 / 10

VII.- REPLACEMENT PROCEDURES
1. - TO REPLACE PAPER BAG (9 )
1.1.- To change the bag of paper (9) release the cover side latches (2)
1.2.- Lift up the cover (18).
1.3.- Replace the paper bag and reassemble the cover(9).
2.- TO REPLACE CLOTH BAG (28)
2.1.- Follow the steps indicated on point 1.1 and 1.2.
2.2.- Remove the cloth bag.
2.3.- Change the fabric bag and reassemble again.
3.- TO CHANGE THE SECONDARY FILTER FRAME(HEPA)(22).
3.1.- Follow the steps indicated on point 1.1, 1.2 and 2.2.
3.2.- Remove the framework of the secondary filter (hepa)(22).
3.3.- Remove the secondary filter (hepa).(22) and reasemble again.
4.- TO CHANGE THE MOTOR (30)
4.1.- Follow the steps indicated on point 1.1;1.2;2.2;3.2 and 3.3.
4.2.- Remove screws (3) from the back rest (7), screws (6) of the Cabinet support (17) and the front cabinet (16).
4.3.- Remove the secondary filter plate and the seal body philips screws(5).
4.4.- Remove the motor cover (20) with the top motor mount (35) and the motor shroud top (37) and motor seal
(38)
4.5.-Disconnect the harness switch and the line cable
4.6.-Change the motor (30) and reassemble again.
5.- TO CHANGE THERMAL PROTECTION(1)
5.1.- Follow the steps indicated on point 1.1 , 1.2 ,3.2,4.2 to 4.4.
5.2.- Remove the shroud engine (31) together with the lower shroud for engine.
5.3.- Withdraw the philips screws bread head screw (4) and remove the thermal protection.
5.4.- Replace and reassembly again.
6.- TO CHANGE SWITCH HARNESS (29)
6.1.- Follow the steps indicated on point 1.1,1.2,2.2,3.2,4.2 to 4.5
6.2.- Remove the nut heyco (13) and the safe heyco (12) to be able to remove the harness switch.
6.3.- Replace and reassembly again
.
7.- TO CHANGE POWER HARNESS (10) ,FIG 2.
7.1.- Follow the steps indicated on point 1.1,1.2,2.2,3.2,4.2 to 4.5
7.2.- Remove the the nut heyco (13) and the safe heyco (12) to be able to remove the harness switch
7.3.- Replace and reassembly again.
8.- TO REPLACE POST FILTER (8)
8.1.- Remove the front cover (24) and the port filter (8).
8.2.- Replace and reassemble again.
7
APRIL-09