KOB PYROT KPT 1250, Инструкция по эксплуатации и обслуживанию

Страница: 10 / 36

9
afety (continued)
Frozen water pipe hazard
Your heating boiler is designed to provide
a warm and comfortable living environment. It is
NOT designed to ensure against freezing of water
pipes. The boiler is equipped with several safety de-
vices that are designed to shut down the boiler and
to prevent it from
restarting in the event of various unsafe
conditions.
If your boiler remains off for an extended period of
time during cold weather, water pipes may freeze
and burst, resulting in extensive water damage and
conditions in which mold could grow. Certain molds
are known to cause respiratory problems, as well as
to pose other serious health risks. In case of water
damage, immediate measures should be taken to dry
out affected areas as quickly as possible to prevent
mold from developing.
If your home will be unattended for anextended pe-
riod of time during cold weather, you should...
Shut off the water supply to the building, drain
the water pipes and add antifreeze for potable water
to drain traps and toilet tanks. Open faucets where
appropriate.
Or…
Have someone check the building frequently dur-
ing cold weather and call a qualified service agency
if required.
Or...
Install a reliable remote temperature sensor that
will notify somebody offreezing conditions within
the home.
Failure to protect against frozen pipesafety
If you notice fire coming from the appliance, call the
fire department immediately! Do not attempt to ex-
tinguish the fire unless qualified to do so.
Installation area conditions
Ensure ambient temperatures are higher than
50°F / 10°C and lower than 104°F / 40°C.
Prevent the air from becoming contaminated by
homogenate hydrocarbons (e.g. as contained in
paints solvents or cleaning fluids) and excessive
dust (e.g. through grinding or polishing work).
Combustion air for the heating process, and ventila-
tion of the boiler room must be free of corrosive
contaminants. To that end, any boiler must be in-
stalled in an area that has no chemical exposure.
The list to the right indicates the main, currently
known sources.
Avoid continuously high levels of humidity (e.g.
through frequent drying of laundry).
Never close existing ventilationopenings.
Replacement components, spare and wear parts.