manualshive.com logo in svg

Ko Propo EX-RR, Инструкция по эксплуатации

Поделиться
Скачать
Ko Propo EX-RR Скачать руководство пользователя страница 22

B

1

2

3

4

22

Fail-safe is when the receiver loses the radio signal
of the transmitter and the function keeps channel 2
(throttle) in an optional position.
The configuration is usually full brake or neutral.

2 Channel

Press for 3 seconds

LED light goes off

Full Brake

Neutral

Transmitter ON

Reciever ON

This function works for only 2nd
channel.

Turn off the transmitter. And the
device that connected into 2nd
Channel will move to the position
that you set up.

While holding the position, press
the setup button on the receiver
for 3 seconds.

Hold the setup button on the
receiver until the LED light goes off
and release the button. Fail-safe
setting is complete.

Recommended positions are the 
following :

Full Brake
● GP car
● EP car
(forward / Brake)

Neutral
● EP car
(forward / Back)
(forward / Brake / Back)

Turn on the transmitter.

Turn on the receiver and verify
operation.

ペアリング後

Hold the throttle to
the position On the
transmitter, hold the
throttle to the position
you would like it to be
set to.

● Fail-Safe Setting

If you change the position of the fail-safe operation,
please set again. We recommend to set it again even
if you modify the car engine brake linkage.

Please be sure to set the fail-safe.

Содержание EX-RR


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды