manualshive.com logo in svg

Ko Propo EX-RR, Инструкция по эксплуатации

Поделиться
Скачать
Ko Propo EX-RR Скачать руководство пользователя страница 20

20

① Bring distance of EX-RR and MiniZ close to about
   10cm.

② Switch on MiniZ while pushing the setup button
    of Mini-Z.

Pushing setup button

Switch on

LED

③ After the Mini-Z's LED has lit up, release the
    setup button. Then ｃ heck that the Mini-Z's LED
    lights up again (indicating pairing completion)

① Switch off MiniZ.
② Switch off the EX-RR main power, then switch on
    EX-RR again.
④ Bring distance of EX-RR and MiniZ close to about
    30cm. Switch on the Mini-Z and check that the
    receiver LED is lit. If the LED flashes, the Mini-Z
    is not getting the EX-RR signal and the pairing
    procedure should be repeated.

  

Preparing the Mini-Z

2.

  

Preparation for operation

3.

● Pairing (For MiniZ MHS)

  

Preparing the Transmitter 

＜ MHS/General ＞

①  While pushing the ET2 lever up, power on.
　  The pilot LED lights up, release ET2 lever.

② Displays the initial screen, then pairing display is
    shown. (indicating transmitter is transmitting the
    pairing signal.)

1.

Power
ON

↓

In order for the receiver to operate, it must store the 

transmitter's unique ID in its memory in a process 

called "pairing". Even if a single transmitter used to 

control multiple receivers, each receiver must go 

through the pairing process with the transmitter 

before being used for the first time.
※ Please adjust the modulation mode before 　　　

　 pairing. (p.18) A receiver does not work normally 

　 in a different mode.

Pairing  procedures  may  not  go  smoothly  if  there 
are  wireless  LAN,  microwave  ovens,  or  other  users 
conducting  pairing  procedures  nearby.  In  this  case, 
move  some  distance  away  or  wait  a  while  before 
attempting the pairing procedure again.

↓

↓

ET2

<French mode pairing ＞
French mode pairing is possible when the ET2 lever is released after 
LED turns off. Please use this feature if the situation is needed.

If the mode is changed（General or French), please
conduct pairing procedures with the Mini-Z you are using
again.

10cm

P

The MHS communication pattern of the EX-RR and 
receiver are modified. Please use the French mode 
when  the  location  of  usage  requires  this  mode. 
When in any other location, please use the general 
mode.

French mode pairing…

Содержание EX-RR


























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды