key to confirm.
4. SETTING LCD CONTRAST
* In on hook state, press SET key, press UP or DOWN key, when the LCD displays
SET 4 LCD, press SET key again, press UP or DOWN key to set desire LCD
contrast level.
* In on hook state, press FLASH key to enter setting LCD contrast, press FLASH
to set desire LCD contrast level, press SET key to quit.
5.1.4 SETTING PABX CODE
In on hook state, press DEL key for 3 seconds to enter set PABX code, the LCD
displays
‘
PCODE-
’
and
‘
-
’
flashes, press UP or DOWN key to set PABX code,
press SET key to confirm and quit.
5.1.5 SETTING ALARM CLOCK
In on hook state, press ALARM/P,LCD displays
“
12-00 AL1
”
,press SET key,
press UP or DOWN key to set the alarm time(24 hour) format and press SET key
to confirm and enter the second alarm time, and the alarm symbol displays on
LCD, the setup of second set of alarm clock is the same as the first.
Note: The first 3 alarm clock is repeated periodically every day. the last 2 alarm
clock will be affected one time.
When the alarm clock is active, press any key to terminate.
During entry if you make a mistake, press DEL key to backspace and erase the
wrong entry. Time should be entering in 24 Hours format.
Press ALARM/P, press UP or DOWN key to select open or close the alarm.
5.2 Incoming call function Operation
5.2.1 Reviewing incoming number
In on hook state or off hook state(handset or speakerphone mode),press UP or
DOWN key to review the incoming numbers one by one, After all numbers are
reviewed, LCD displays --END--
5.2.2 Delete an incoming number
In on hook state,press UP or DOWN key to select the desired number which you
want to delete,,press DEL key,the number is deleted.
In on hook state,press UP or DOWN key,press DEL key for 3 seconds,all the
Incoming CLI number will be deleted.
Note: New incoming call has not been reviewed and can not be deleted.
5.2.3 Calling back
* In on hook state, review to the desired number,press hand-free key or LINE1 key
or LINE2 key or REDIAL key to dial out the number.
* In off hook state,press UP or DOWN key to review the desired number,then
press REDIAL key to dial out the number.
5.2.4 Indicator for missed call
* When missed a new call,the indicator for missed call will be flashes.
In on hook state, when the missed calls are reviewed,the indicator will be closed.