25) 4 Kinds of Polyphonic Ringing Music For Selection (Note: Battery current
consumption will be high with polyphonic music)
Caller ID service is available from your local telephone office.
Before using, please install the unit properly in order to get correct usage.
1. The unit requires 3*1.5V AA batteries. Open the battery compartment cover and
insert the batteries in the right polarity, then close the cover (Proposal using alkali
battery).
2. Connect the coil cord to handset and the base.
3. Insert the two line cords into the line jacks of the base and the other ends to the
wall outlet of exchange. If you use one telephone line cord only, please connect
the wider line cord to LINE1/2 jack of this unit, otherwise it can not work as normal
The menu review: on hook state, press SET, press UP or DOWN key, LCD
displays corresponding contents, when finding the desired setting item,
press SET key to enter the correspond setting mode.
1. SETTING DATE/TIME
In on-hook state, press SET key, LCD displays
‘
SET 1 DATE
’，
Press SET key
again, The LCD displays year and flashes, press UP or DOWN key to change the
year you want, press SET key again to confirm and enter month setting. Press UP
or DOWN key to change the month you want, press SET key again to confirm and
enter date setting. Press UP or DOWN key to change the date you want, press
SET key again to confirm and enter time setting. The setup step is the same as
the date setup step .Press SET to confirm.
2 .THE AREA CODE FILTRATE FUNCTION
In on-hook state, press SET key, press UP or DOWN key, when the LCD display
SET 2 CODE, press SET key again, LCD display CODE
… …
and first point
flashes, press UP or DOWN key to choose the local code, press SET key to
confirm.
Example: If input the area code is 0123, when an incoming call 0123456789 calls
in, the unit will auto filtrates area code, LCD displays 456789 to store.
Note: the area code can be set 6 digits at most, over 6 digits inefficacy.
3 . SET LONG DISTANCE CODE
In on-hook state, press SET key, press UP or DOWN key, when the LCD displays
SET 3 LCODE, press SET key again, the LCD displays
“
--------------- 0
”
,press
digit keys directly to set long distance code, press DEL key to delete, press SET
GETTING STARTED
SETTING THE MENU ALL OF THE FOLLOWING SETTING NEED TO BE TRANSLATED
