manualshive.com logo in svg

KNEGT 404G2 Series, Руководство по эксплуатации

Поделиться
Скачать
KNEGT 404G2 Series Скачать руководство пользователя страница 102

404G2 

SERIES TRACTOR OPERATION MANUAL 

100 

Appendix 8 Optional Accessories 

No.

Accessory

 

Qty.

 

Application 

1 

Safety frame 

1 

Safeguard the operator 

2 

Sunshade 

1 

Safeguard the operator 

3 7.5-16(turf 

tyre) 

2 

4 12.4-24(turf 

tyre) 

2 

5 280/70R16 

2 

6 360/70R24 

2 

Appendix 9 Application Packing List 

No. 

Designation and specifications 

Qty. 

Remarks 

1 

Dongfeng Brand Tractor 

1 

To be disposed as per order 

2 

Spare parts of engine 

1 

3 

Attached tool kit of the tractor 

1 

List of tool box will be 
delivered additionally   

4 

Tractor operation manual 

1 

5 

Tractor illustrated parts catalogue 

1 

6 

Certificate of quality 

1 

Encasement member:                                                           

Date:

Note: 

The information contained in this operation manual is a general introduction 

only. Which is subject to change without notice at any time for technical or other 
reasons since our product will be under uninterrupted improvements and modifications. 
Therefore, we would request the user/dealers to give out the manufacturing date and 
serial number while they place order for spare parts and components. 

Thanks.

Содержание 404G2 Series










































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды