25
All work on the machine may only be performed by trained personnel.
The locally applicable safety and accident prevention regulations must be
observed.
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
This can result in serious injury. Personal protective equipment must be
worn.
CAUTION
Fill water tank (6-1/1) with approx. 9 liters of
water.
Connect the power plug (CEE plug) to the power socket provided on site (3x 400 V, 16 A).
Set the main switch (6-2/1) to “I”. The wet-grind-
ing belt, polishing disc / wet-honing wheel and
finned grinding wheel / serration grinding wheel
rotate.
Check the direction of rotation. The direction
arrow (6-2/2) indicates the rotation direction the
wet-grinding belt and polishing disc / wet-honing
wheel and finned grinding wheel / serration grind-
ing wheel.
If the rotation directions are incorrect, have the
phase reversed by a qualified electrician.
The feed quantity of coolant is regulated by turn-
ing the water nozzle (6-1/2).
After verifying the correct rotation direction, turn
the main switch (6-2/1) to the “0” position.
Figure 6-2
Figure 6-1
6. Commissioning
1
2
2
1
Содержание USK 160 S
Страница 2: ...2 ...
