13
The responsibilities of the personnel must be clearly assigned, i.e. commissioning, operation,
maintenance and repair, etc.
Personnel still undergoing training or instruction may only work on the grinding machine under
the permanent supervision of an experienced person!
2.4.5 Machine control system
Only trained and instructed personnel are allowed to switch on the machine.
2.4.6 Safety measures in normal operation
Refrain from any method of working which may pose a risk to safety. Only operate the grinding
machine if all the safety devices are installed and fully functional.
Check the grinding machine for external signs of damage and correct operation of the safety
devices at least once every shift.
Report any changes (including operating behavior) immediately to the department / person in
charge. Where required, shut down the grinding machine immediately and secure against restart-
ing.
Before switching on the grinding machine, ensure that no one is exposed to any risk from the
start-up of the machine.
If there are any functional faults, stop the machine immediately and secure against restarting.
Have the faults eliminated immediately.
2.4.7 Hazards due to electrical power sources
Work on electrical units or operating materials may only be performed by a qualified electrician in
accordance with electrical rules.
Defects, such as damaged cables, cable connections, etc. must immediately be rectified by an
authorized electrician.
2.4.8 Particular hazard zones
In the area of the wet-grinding belt, finned grinding wheel, serration grinding wheel, polishing
disc and wet-honing wheel, there is a risk that clothing, fingers, and hair, for example, may be
pulled in and crushed. Suitable personal protective equipment must be worn.
2.4.9 Servicing (maintenance, repair) and fault elimination
Maintenance work is to be carried out on schedule by trained personnel. Inform operating per-
sonnel before starting repair work. A responsible supervisor must be appointed.
2. Safety
Содержание USK 160 S
Страница 2: ...2 ...
