KNECHT USK 160 S, Руководство по эксплуатации

Страница: 29 / 44

29
7.5 Polishing and deburring with the polishing disc
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Never hold the cutting edge against the rotation direction of the
polishing disc.
Polishing gives rise to grinding particles that could enter the eyes. Wear
safety glasses. Wear a face mask.
This can result in serious injuries.
CAUTION
The burr on the knife is removed with the polish-
ing disc; this gives the knife its final sharpness.
Set the main switch “I / 0” (3-5/1) to “I”.
Hold the polishing paste (7-3/1) briefly against the
polishing disc (7-3/2).
For polishing / deburring, move the knife (7-4/1) at
a steep angle (approx. 20 - 25°) along the polish-
ing disc (7-4/2).
Alternately polish the upper and lower side of the
knife until the burr is removed.
Switch off the grinding machine after the polish-
ing process is finished. To do so, switch the “I / 0”
main switch (3-5/1) to the “0” position.
7. Operation
Figure 7-3 Applying the polishing paste
1 2
Figure 7-4 Polishing hand knives
2
1