30
7.6 Deburring the wet-honing wheel
There is a risk that hands, hair, and clothing may be pulled in while the
grinding machine is switched on.
Never hold the cutting edge against the rotation direction of the
wet-honing wheel.
Polishing gives rise to grinding particles that could enter the eyes. Wear
safety glasses. Wear a face mask.
This can result in serious injuries.
CAUTION
Knives can also be deburred on the water-cooled
wet-honing wheel.
The exact circumferential speed and optimal hard-
ness of the wet-honing wheel result in a smooth
blade that remains sharp for a long time.
Set the main switch “I / 0” (3-5/1) to “I”.
When deburring, move the knife (7-5/1) at a flat
angle (approx. 15°) and apply strong pressure
along the wet-honing wheel (7-5/2).
As soon as the burr is removed, continue grinding
at a slightly steeper angle (approx. 17°) and with-
out applying pressure.
Switch off the grinding machine after the deburr-
ing process is finished. To do so, switch the “I / 0”
main switch (3-5/1) to the “0” position.
7. Operation
Figure 7-5
Deburring hand knives
1
2
Содержание USK 160 S
Страница 2: ...2 ...