If you add time while the kneader is temporarily stopped due to the completion of a process and
then press the button, it is possible to lengthen the completed process. (This is only possible in
manual mode.) Furthermore, it is possible to go back to the previous process by temporarily
stopping the current process with the button and then pressing the button even if the
kneader has already moved onto the next process.
If you press the buttons during kneading (or mixing), it is possible to change the speed and time.
* Blade does not rotate at speed 0.
Recipe Features
When there is insufficient kneading or fermentation
8
It is possible to change the speed and time during operation
6
Press the button to temporarily stop the kneader
7
Recipe Number
01
(Kneading only)
02
(Straight method)
03
(Ohchi method)
Features
When you feel there is sufficient kneading or fermentation
during operation
9
If you press the button and then press the button while the kneader is temporarily stopped,
it is possible to move onto the next process.
Although only process 1, you can freely use by setting the speed to “0” and
switching to fermentation mode or setting the time to a few seconds and
switching to degassing mode.
(It is possible to set, change and save only the speed and time of process 1.)
We recommend this for the short kneading of three processes: process 3
(kneading), process 4 (fermentation) and process 5 (degassing).
(It is possible to set, change and save only the speed and time.)
We recommend this for those who will fully use all seven processes in the
pursuit of deliciousness.
(It is possible to set, change and save the speed and time of all the processes.)
Please refer to p13 about Ohch method.
11
11