39
Replacing the keyboard
Gluing on the keyboard
The control panel is self-adhesive. The adhesive surface is covered
by a protective film.
Practical tip
Apply the control panel at the top at first, because corrections can
be made here easier.
Result
The keyboard has been replaced.
Spare parts
Process
Figure
1. If there is any protec-
tive film of the win-
dow for the LED
display (B), remove
it.
2. Bend the flexible flat
cable (A) slightly
away from the key-
board.
3. Remove protective
film from the adhe-
sive surface. Make
sure that the flexible
flat cable does not
come into contact
with the adhesive
surface.
4. Guide the flexible flat
cable through the
slot.
5. Gluing on the key-
board. Start at one of
the corners for that.
6. Connect the flexible
flat cable of the key-
board.
Fig. 47
Keyboard
A
B
Component
Comment
Order number
Keyboard
M2146XA