Knauer BlueShadow 10P, Руководство по обслуживанию

Страница: 25 / 57

26 Removing and maintaining the pump drive
Removing and maintaining the pump drive
Prerequisite The housing has been opened.
The pump head has been removed.
Procedure Procedure for removing the pump drive

Disconnect all electrical connections of the pump drive.

Remove the pump drive.

Open the pump drive.

Check the movable parts on the inside of the pump drive.

Greasing the movable parts on the inside of the pump drive.
Tools Cross-head screwdriver (size 1)
Auxiliary material

Molykote grease paste

Molykote bearing grease
Duration About 30 minutes
Level of difficulty Level 4 (from 1 to 7, very easy to very difficult)
Removing the pump
drive
Process Figure
1. Loosen cross-head
screw of the ground
connection (A).
2. Open cable holder
with ferrite core (B)
and remove the
cable.
3. Loosen cable plug
(C) at the Hall sen-
sor.
4. Loosen cable plug
for the power supply
of the motor from
the motherboard.
Fig. 28 Pump drive
A B C D