35
Replacing the fan
Result
A new fan has been inserted and connected to the main board
via a PIN connector.
Process
Figure
1. Set the fan (B) onto
the rear panel of the
device, so that the
arrow on the fan
indicating the direc-
tion of rotation cor-
responds with the
arrow in the dra-
wing.
2. Place washers onto
the cross-head
screwdriver (A).
3. Insert all 4 screws
through the rear
panel of the device.
4. Position the toothed
washers and the nuts
(B).
5. Tighten the screws
on the outside while
using the wrench to
stabilize the nuts on
the inside.
6. Plug the PIN connec-
tor into the mother-
board.
Fig. 41
Installing the fan
A B C
