background image

4.1

4.2

5.1

5.0

Slide the 

monitor onto 

the vesa plate 

until the quick 

connect snaps 

into place

Affix the six (6) 

velcro hook and 

loops to the 

keyboard tray

Position and 

press the 

keyboard onto 

the tray

Monitor mount 

allows for 90° vesa 

rotation

Tighten or loosen 

set screws on 

both sides to 

disable auto-

retract feature

Actuate lever 

for height 

adjustment

OOLS REQUIRED

Wall Mount

Console

Screw

Pad

Pan Head Screw

Toggler

Mouse cable 

manager

FXTM181 Rev. C

FXTM181 Rev. C

INSTALLATION WARNINGS:

 Read the entire instruction sheet before you begin installation or 

assembly. Installer must verify that the wall will safely support the combined weight of all the 
attached equipment and hardware. Improper installation of this product can cause extensive 
property damage or serious personal injury, either during or after the installation. It is the 
responsibility of the installer to ensure that all applications including wood, concrete, block, brick, 
steel, etc. are secured properly to code. California installations could require specific anchorage, 
and additional mounting screws. Check with local authorities for codes in your area. Other 
seismic states have similar regulations.

Warning:

 Max load 20 lbs of applied equipment including but not limited to: LCD, keyboard, 

mouse, cabling and peripherals.

DISCLAIMER:

 The Manufacturer and/or Distributor will bear no responsibility for any damages of 

any kind arising from any improper installation of this product. Because wall construction varies 
widely and the ultimate method of mounting is out of the Manufacturers or Distributors control, 
it is imperative that the installer consult with local engineering, architectural, or construction 
personal to ensure the wall is constructed properly and to code to handle the applied load.

PARTS IN A BOX

TOOlS RequIRed

INSTALLATION INSTRUCTIONS

For Flush wall mount work center

STeP 4

Отзывы: