1.0
3.0
1.1
Measure
44" from
the floor
to the
bottom of
the wall
plate
Level
wall
plate,
install
using
screws or
toggler
bolts
provided
Utilize the provided
cable management wrap
to bundle the wires
Cables can exit the top
or the bottom of the
Fusion mount
Holding the wires
behind the cable
management
cover, slide the
cables into the
slot leaving
approximately
13–15" of slack
(for optimal height
adjustment)
Attach the plastic
end caps to the
top and bottom of
the Fusion mount
with the screws
provided
Align the Fusion mount
over the track, then
slide it down the wall
plate until the Fusion
stops sliding
Secure the Fusion
mount to the wall
plate with the screw
provided
44"
Floor
3.1
4.0
3.2
2.0
1.2
Attach the quick connect bracket
to the back of the monitor with the
screws provided
Insert and
tighten screw
2
3
Installation Instructions:
FXTM181
Installation Instructions:
FXTM181
STeP 1
STeP 3
STeP 2
