figure
3
ÿ20×ÿ13 mm
Figure 1
Spring cushion M12
Adjustable Wrench (User Prepared)
Attach Wall Bracket to Left
Bracket (as in Figure 2), 3 sets of
mounting heights (1 & 4, 2 & 5, 3 & 6),
optional on demand.
Figure 4
Packing list
Figure 2
· It is recommended to equip this model with a 55 to 86 inch
interactive whiteboard.
Step 3
Step 2
M8 × 25 mm
Note: "*" Indicates that due to differences in models, some models include this accessory, please refer to the current one.
Step 1
M6 × 130 mm
Adjust the wheel to
the braking state before
operation.
Step 4
Set the wheel to the brake state and screw it into the brackets
(as in Figure 1).
2support
3
4 pieces
F - Bar for hanging on the wall 2 pieces*
fasten all
bolts
First insert the
hole position
2 pieces
· To ensure correct and safe use, read
6
· The maximum weight of the bearing can support up to 100 kg.
carefully read this manual before installation.
5
Phillips Screwdriver (User Prepared)
1
on the stand
4
M6 screw*
1 PC
1 PC
Mobile Stand Installation Guide
C - Wall bracket 1 piece
Cross recessed hex head screw
14 pieces
A - Left support 1 piece
Compatible models
55“
Matching holes
3, 6 2, 5 1,
4
65" - 70"
75" - 86"
supports (as in Figure 4).
Attach the right bracket to the other end of the bracket
Installation of the tray between the two
E - Wheels 4 pieces
wall (as shown in Figure 3).
Wall Bracket Hole Suggestions
1
B - Right support 1 piece
Tray in
positioning
pins
adjust the
D - Tray 1pc
Version: 1.1
Tray on
locating pin
Front of
Front of
1
1
installation steps
