KMC Controls SimplyVAV BAC-8001, Руководство по применению и установке

Страница: 22 / 75

Procedure Detailed steps Sensor display
1
Starting display
1. Start at the temperature display.
2. Press the
and buttons together.
l
If Password 2 is not required, the display
changes to
CNFG
.
l
If required, enter Password 2. The display
changes to
CNFG
when Password 2 is correct.
72
12S1
2
Enter Password 2.
1. Press the
and buttons together and hold them
down until the display changes to
PSW2
.
2. Press the
or button to change the first digit.
3. Press the
Set
Point
button to select the next digit. Repeat
for all four digits.
4. When the button is pushed for the fourth correct digit,
the display changes to
COMM
.
Note: If Password 2 has not previously been entered
the display will change to the
CNFG
display after
Step 1.
PSW2
OOOO
3
Select a configuration
function.
Access to the configuration functions always start at the
CNFG display.
CNFG
Enter the configuration mode
Section 4: Configuring the controllers KMC Controls, Inc.
22 Revision H