KMB NOVAR-1 Series, Руководство по эксплуатации

Страница: 59 / 77

Novar 1xxx KMB systems
59
31
÷
37
alarm thresholds: undervoltage,
overvoltage, THDI, THDU, CHL,
number of connections and
temperature — — — Ranges and units as in Table 4.7
not displayed if the alrm not set up
40 alarm instantaneous condition
Indicates current state of alarm.
43 section connection time (in
thousands of hours)
Display range 0.001 to 130
In effect for contactor group outputs only.
44 number of section connections (in
thousands)
Display range 0.001 to 4000.
In effect for contactor group outputs only..
45 instrument failure condition
46 instantaneous condition of control
time
time until next contactor group control
intervention in seconds
50 instrument address
(communication interface)
1 ÷ 254 1 1
51 communication rate
(communication interface)
4800 – 9600 –
19200 Bd — 9600 Bd
52 communication protocol
(communication interface)
KMB(P0) — KMB(P0)
Modbus-RTU protocol not supported
55 power system frequency A (auto) – 50 Hz –
60 Hz — A (auto)
56 average value evaluation moving
window size
1 minute ÷ 7 days - 7 days applies to average values of Acos, APac,
APre
57 minimum and maximum value
evaluation moving window size
1 minutes ÷ 7 days - 15 minutes applies to these minimum and maximum
values: mincos, maxPac, maxPre,
maxdPre
58 Celsius/Fahrenheit temperature
display mode
°C – °F - °C
59 cooling enable threshold +10 ÷ +60 °C 1 °C +40 °C
not displayed if cooling output not
specified
60 heating enable threshold -30 ÷ +10 °C 1 °C -5 °C
not displayed if heating output not
specified