KlipXtreme BigBash KWS-920, Руководство пользователя

Страница: 3 / 10

Media panel controls
In addition to the top panel keys, an infrared remote control is included which provides additional functions to
allow greater control over the media player.
1. Install the supplied batteries in the remote control following the correct polarity as indicated inside the
compartment.
2. In order for the remote to operate properly, ensure that it is pointed toward the front of the speaker.
Remote control
Control Description
Press it to select the audio source connected to the 3.5mm stereo line-in jack
on the back of the unit
Press it to select
Bluetooth
®
as the input mode
Press it to select the audio source connected to the USB port on the top
panel of the speaker
Press this button to switch the device from standby to active mode, and vice
versa
Press this button to cycle through the six different lighting schemes, and also to
disable this feature
Enables the channel selection, tuning and storage of scanned frequencies
In USB or
Bluetooth
®
mode, press this button to select the previous or next
track in your playlist
In tuner mode, this button will scan memorized channels in a downward or
upward direction
This feature is not available in auxiliary mode
Increases or decreases the bass (low) frequencies of the speaker
In USB or
Bluetooth
®
mode, press this button to start and pause media
In tuner mode, press and hold to initiate the scanning of channels from the
lowest up to highest frequency, and store them automatically as presets in the
memory
This feature is not available in auxiliary mode
Amplifies the low-frequency output by a few notches. When this function is
enabled,
Loud
appears on the screen. The screen will change to
Null
when
the booster is disabled
Adjust this knob to control how much of an echo effect is applied to the signal
from the microphones actively connected to the speaker
1. AUX mode
2.
BT
3. USB
4. ST-BY
5. LED illumination
6. Tuner
10. BASS BOOSTER
11. Echo knob
9.
8. Bass + / -
7. /
Control Description
Controls the audio level of the wireless and wired microphones actively
connected to the speaker
Mic volume 1
will control the audio from both wireless microphones plus the
input from a wired microphone connected to Mic 1.
Mic volume 2
will
control the Mic 2 input from a wired microphone.
Toggles the signal from a wired microphone and guitar connected to the
Mic 2
stereo input. When the button is depressed, the microphone
reverberation is disabled.
These stereo 1/4-inch jacks accepts the input from a wired microphone or
guitar
Controls the overall audio level from all inputs. Turn it counterclockwise to
lower the volume. A clockwise rotation will increase the volume level of the
speaker
Connect your USB flash drive to play MP3 and WMA music files
It exhibits the mode, volume level, the selected channel and the track being
played
12. Mic. volume 1 / Mic. volume 2
13. Mic /Guitar button
14. Mic. 1 /Mic 2
15. Master volume
16.
USB port
17. LED display
12
9
8
6
4
2
3
10
7
5
1
11
13
TUNER
USB
14
11
12
7
8
9
13
1
2
3
4
5
6
15 17 16
10