Instruction Manual
IDO
8065
-HILO
8065
09/01/19 Rev: 1.0. 0 (TRANSLATION OF ORIGINAL LANGUAGE)
32
13.5. Brush replacement
This is done as follows.
1. With brush plate raised (tilted machine)
2. Press on the top of the brush, so to remove the it from its rim hub and let it drop on the floor.
3. To insert the new brush, place it under the brush plate, roughly aligned with the hub, then lift it with
your hands and push it against the hub until it engages the closing tabs (until you hear the snap).
In order to avoid brush or pad warping in case of no use, it is recommended to always keep the machine
in a tilted position.
