Instruction Manual
IDO
8065
-HILO
8065
09/01/19 Rev: 1.0. 0 (TRANSLATION OF ORIGINAL LANGUAGE)
18
▪
Immediately report any machine damage or malfunctioning.
▪
Do not use the machine unless it is in perfect operating conditions. Carefully read the information.
▪
Identify all the machine's safety devices.
▪
Assure adequate training of the personnel in charge of operating the machine.
▪
DO NOT OPERATE THE MACHINE IN THE FOLLOWING CASES:
▪
You have not been trained and authorised.
▪
The operating Guide has not been read.
▪
You are in an area under risk of fire or explosions.
▪
You are in an area where there is a falling objects hazard.
▪
DURING MAINTENANCE OPERATIONS:
▪
Avoid moving parts. Do not wear loose clothes, such as jackets, shirts or in general,
necklaces or hanging objects
▪
clothes with wide sleeves when using the machine.
▪
Use KlinMak approved spare parts.
3.1.
Declaration of absence of harmful substances
We hereby declare that our products, used in the process of assembling the machine, are produced with
materials that comply with the limits established by the regulations in force on the protection of health
and the environment and do not contain substances classified as SVHC (Substance of Very High
Concern) in accordance with CE 1907/2006 regulation (REACH, i.e.
Registration, Evaluation,
Authorisation and Restriction of Chemical substances).
Although the above mentioned substances are not employed in processing cycles of raw materials and our
products, their presence cannot however be ruled out in the order of p.p.m. (parts per million), due to the
micro-pollution of the raw materials.
3.2.
Safety devices of fixed closing guards
The components that protect some areas that contain moving parts or live equipment are considered fixed
closing guards.
The brush plate is fitted with closing guard, consisting in the plastic material protection casing.
Do not remove the fixed closing guards. In the event of maintenance, ensure the same are reassembled
before turning on the machine and starting to work.
