Klever B Lux 25, Руководство пользователя

Страница: 34 / 39

www.klever-mobility.com www.klever-mobility.com 66 67
Data Data
14. Technical data Klever B Lux 25
Colour LCD Display
Illuminated colour LCD-display, with starter & motor immobiliser and acoustic alarm
5 levels of electric motor support: N – ECO – TOUR – MAX - TURBO
Bicycle computer: current speed, range, trip, km-day, time, Kcal, odo, cadence
TURBO button for: walk-assist/ acceleration at standstill without pedalling / while pedalling
Battery state of charge SOC with 5 bars (each bar representing 20% battery capacity)
Ambient light sensor
Actuation of buttons confirmed with acoustic beep
Rechargeable 570 Wh battery
Lithium-Ion
44.4 V/ 12.9 Ah/ 570 Watthour/ 3.0 kg.
State of charge indicated by LED: < 35% red / 35 – 75% yellow / > 75% green
Allowable discharge temperature: -20°C – +50°C
Allowable storage temperature (12 months): -20°C – +25°C; (o5°C – +20°C)
Allowable charging temperature: -5°C – +45°C (o5°C – +20°C)
Lockable and detachable
Charging time: 570 Wh with 2A charger 7 hours
Place of charging: on or off B Lux 25
Charging cycles: 700 (one complete charging is cycle is 0 – 100% capacity)
Range: 570 Wh 40 – 125 km., under average conditions 65 km.
Lifetime: after 2 years of 700 complete cycles at least 60% of the original capacity still remains.
350 Watt Motor
Brushless DC motor in the rear hub
Control through torque sensor in the frame dropout and speed sensor in the bottom bracket
Output power – torque: 350 Watt – 43 Nm. (limited through software to 250 Watt)
Operating voltage: 44.4 V
Electric motor support: until maximum 45 km/h.
Weight: 5.0 kg. – 350 Watt
Standard 2A charger
Input voltage: 200 – 240 V; 47 – 63 Hz
Output voltage: 48 V
Maximum charge current: 2A
Output power: 96 Watt
Size: 167 x 65 x 41 mm. (without fan)
Weight: 0.6 kg.
Recommended tightening torque for bicycle components
Stem
Clamp bolt handlebar 4 x M5 Allen key 4 mm. 5.5 Nm.
Clamp bolt steerer tube 2 x M5 Allen key 4 mm. 5.5 Nm.
Clamp bolt adjusting stem
angle
2x M6 Allen key 5 mm. 13 Nm.
Brake lever Clamp bolt handlebar 1 x M5 Allen key 4 mm. 5.5 Nm.
Reach brake lever 1 x M4 Allen key 2 mm. -
Grip Clamp bolt handlebar 1 x M4 Allen key 3 mm. 3.0 Nm.
Display Clamp bolt handlebar 1 x M5 Allen key 3 mm. 3.0 Nm.
Shifter Clamp bolt handlebar 1 x M5 Allen key 4 mm. 5.5 Nm.
Headlight Mounting bolt 1 x M5 Allen key 4 mm. +
8 mm. open wrench 5.5 Nm.
Seat post Mounting bolt saddle 2 x M6 Allen key 5mm. 9.5Nm.
Seat post clamp Clamp bolt seat post 1 x M6 Allen key 6 mm. 9.5Nm.
Front wheel Hex nut 9 mm. axle Open wrench 15 mm. 25 Nm.
Brake calliper Mounting bolt 2 x M6 Allen key 5 mm. 9.5 Nm.
Disc rotor Mounting bolt 6 x M5 Torx 25 5.5 Nm.
Fender stay Clamp bolt fork leg 2 x 2 x M4 Allen key 3 mm. 3.0 Nm.
Front fender Mounting bolt chain stay 1 x M5 Allen key 3 mm. +
8 mm. open wrench
5.5 Nm.
Rear fender Mounting bolt chain stay 2 x M5 Allen key 3 mm. +
8 mm. open wrench
5.5 Nm.
Ring lock Mounting bolt 2 x M5 Allen key 4 mm. 5.5 Nm.
Luggage rack Mounting bolt 4 x M5 Allen key 4 mm. +
8 mm. open wrench 5.5 Nm.
Rear wheel Hex nut 12 mm.
axle 19 mm. box key &
open wrench
40 Nm.
Non-turn washer LH-side 1 x M5 Allen key 3 mm. 5.5 Nm.
Kickstand Mounting bolt 2 x M6 Allen key 4 mm. 9.5 Nm.
RH pedal RH threading 9/16” x 20 TPI 15 mm. open wrench 40 Nm.
LH pedal LH threading 9/16” x 20 TPI 15 mm. open wrench 40 Nm.
Crank set Mounting bolt 1 x M15 Allen key 8 mm. 40 Nm.
Mounting bolt cover Allen key 10 mm. 5.5 Nm.
Derailleur Mounting bolt 1 x M10 Allen key 5 mm. 9.5 Nm.
Clamp bolt derailleur cable 1 x M5 Allen key 5 mm. 5.5 Nm.
Motor cable Mounting bolt 1 x M5 Torx 25 5.5 Nm.