www.klever-mobility.com
www.klever-mobility.com
28
29
Klever’s E-bike drive train
Submenu ASSIST/REGEN
Setting > ASSIST
With the Assist submenu you adjust the support levels
according to your own personal preferences. You have two
options for Assist settings:
3x5
There are 3 basic levels of ascending motor support: ECO,
TOUR and MAX. Each basic level can be set with 5 sublevels
from 1 to 5 to meet your personal preferences. The factory
default settings for each basic level are 3. The example of
image 5.23 shows MAX with level 5, the strongest support
and ECO with level 1 the least support. Once the levels being
set, you choose with the (
↑
)
and (
↓
)
button the 3 basic levels
ECO, TOUR en MAX in 3 steps. While riding you cannot
change the settings for the sublevels. This must be done in
the Assist menu again.
15
With this option the motor support levels increase gradually
in 15 steps from 1 to 15. From ECO in level 1 (least support) you
go with the
(
↑
)
and
(
↓
)
button in 15 steps linearly to MAX in
level 5 (max support). This can be done during cycling and
there is no need to go back to the Assist menu.
Setting > REGEN
Regen means the regeneration and recuperation of
electric energy back into the battery pack (see section 5.3
Regeneration). There are two regen functions:
• Regeneration through braking: On/Off
• Regeneration while coasting and freewheeling: On/Off
And both braking as well as coasting regeneration have 5
levels of regeneration:
• Automatic
• -1 (light)
• -2 (medium)
• -3 (strong)
• 0 (no regeneration).
The Regen factory default setting has regeneration turned off
for both braking as well as for coasting.
Please note! The REGEN function through braking is
only available on the 45 km/h Type-approval models.
This functionality is not available on our 25 km/h
E-bikes (EPAC’s).
Submenu MORE
With the submenu MORE you can adjust following
parameters: the language of the display, the information
displayed during riding, the clock, weight of the cyclist,
settings for the E-KEY and the display settings. Also, you can
connect your smart phone through Bluetooth with the Klever
display and you can reset trip and calories to zero.
Setting MORE > Language
The display can be shown in the language of your choice (NE,
DE, EN, FR, IT, US).
Setting MORE > Status bar
Seven types of information can be shown on the major display
by default. With a short press of the INFO (•) button you can
go through the loop of these seven types of information (see
section 5.4.1. Function of each button). And you can hide any of
those in case you do not need them while riding.
Setting MORE > Clock
Time can be adjusted or can be synchronised with your smart
phone.
Setting MORE > Cyclist weight
Input the cyclist’s weight for the proper calculation of your
calorie output. You can set the weight of 2 cyclists using the
same E-bike frequently
Setting MORE > E-KEY
The two E-KEYs supplied with your bike are being paired with
the E-drive system by your Klever dealer upon purchase. You
have two options for the E-KEY functionality:
1. E-KEY must always be inserted
When you turn on the system the display will read “insert
E-KEY”. You have to insert the E-KEY to activate the system.
In case you start to ride without inserting the E-KEY, the
alarm will go off and the motor will be locked. Once you have
inserted the E-KEY and the system is being activated, you
can remove it and the system will continue to operate until
you turn off the system. After that the motor lock is being
activated. The next time when you turn on the system again,
the display will ask again for the insertion of your E-KEY.
Klever’s E-bike drive train
