www.klever-mobility.com
www.klever-mobility.com
20
21
Image
5.5
Image
5.6
Image
5.7
Klever’s E-bike drive train
Button
Location
Function
Power
Upper left edge
On/Off system
INFO (•)
Middle left
Switch between time, trip, Km-day, odo, soc
(state of charge), kcal (calories) and cadence
Up arrow (
↑
)
Middle left
Increase support level
Down arrow (
↓
)
Lower left
Reduce support level
á
Turbo
Lower left edge
Walking aid (while walking next to the E-bike)
Strongest support (while pedalling)
Light
Upper left
On/Off light
5.4.1. Function of each button
On/Off button (image 5.5)
Press the POWER button and you’ll boot the system. The
system performs a system check of 3 seconds, and the drive
system is ready to operate. The electric drive will start to
support depending on the level of assistance chosen. Press
this button again, the system will be turned off and all
settings are being stored. Press the button again, the system
starts and all previous settings and levels of support are
enabled again.
Up arrow (↑) button (image 5.6)
Press the up arrow (
↑
) button and you increase the support
level. For instance, when the selected level is TOUR and you
press the up arrow (
↑
) button, the support level of the motor
will increase to MAX level.
Down arrow (↓) button (image 5.7)
Press the down arrow (
↓
) button and you decrease the
support level. For instance, when the selected level is TOUR
and you press the down arrow (
↓
) button, the support level
of the motor will decrease to ECO level.
Klever’s E-bike drive train
INFO (•) button (image 5.8)
Press the INFO (•) button and you enter into a loop
subsequently off ering all rider’s data on the screen. Press
the INFO (•) button shortly in order to go through the
available rider’s data:
time, trip, Km-day, odo, soc, kcal
and
cadence.
See below. Please note: the available rider’s data
may vary depending on Klever model and software version.
Time (hh:mm) (image 5.10)
The time can be adjusted in the settings menu of the display,
synchronising with your smartphone or with the service tool
at your Klever dealer.
Image
5.8
Image
5.10
Image
5.9
Press “INFO button” to
change the D-INFO
