GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
33
2.
Install the horn bracket onto the shield using hardware H9 & H10 in the location where the
bolts were removed in the previous step. The trumpets should be directed towards the
passenger side of the vehicle.
The trumpets may be removed from the horn bases by gripping the chrome collar and twisting
counterclockwise. This may facilitate the installation of the horn bracket by giving better access
to the hardware.
Figure 33- Horn Bracket Installed, Upper Trumpet Removed (Shown)
3.
Fully tighten the hardware and reattach the trumpets to the horn bases (if removed).
