GMTRK-3
Install Guide
This Install Guide Replaces the
GMTRK-1 Installation Manual
REV: B (09/07/2022)
13
6
Bench Assembly – Air Tank & Fittings
Complete the following steps off vehicle. Gather the air fittings for installation onto the air tank.
Apply thread sealant as needed & secure fittings per the below instructions. Equivalents may be used.
Apply two drops of Item 13 (JUICE) to each male pipe thread before installation.
Hand-tighten each fitting, then further tighten ¼ to ½ turn as necessary to match the
fitting orientation shown in the applicable figure.
!!! Use the configuration that is specific to your vehicle !!!
Trucks
SUV’s
