6 Recording modes
Route, as selected, will be started. (When the following Route should not executed, it can be easily can-
celed. No further follow Route will be started. Until now saved Routes will be saved.) By pressing the button
SELECT
and the selection “Route not done” or by pressing the button COM
it will be returned to the last
point of the Route.
Menu Route abort
Between
ProG
Abort Y
(Route abort) and
ProG
Abort N
(Route not abort) can be chosen. By press-
ing the button SELECT
and the selection “Route abort”, the Route will be canceled. The Route is not saved.
Is not started any following Route.By pressing the button SELECT
and the selection “Route not abort” or by
pressing the button COM
it will be returned to the last selected point of the Route.
6.3.4
Resume / Delete a Route
By pressing the button INIT
a menu is started from which the already completed Routes can be restarted
or deleted. Thereby are all the characteristics of a Route are defined as at the start, in the same order, are
automatically continuously displayed. Also displayed at first are the following properties:
•
SEt[
No : 00001
recording number from a Route
•
tIdE.
14 : 33 : 28
the time at which the recording was started
•
datE
23 . 07 . 12
the date when the recording was started, depending on the date format
After displaying all the characteristics of the recording follows the permanent display:
PrFo
Start ?
. By
pressing the button SELECT
the selected Route restarts with the first point. This can always be completed
or aborted, a abort no longer results in the deletion of the recorded Route.
While the menu is displayed following actions are possible:
• With the buttons
+
and
–
can at any time change to the next or previous (if any) recording. Showing
properties begins again.
• With the button SELECT
can change through the properties of forward and finally the recording to be
started again.
• With the button COM
can change through the properties back, and finally the menu completely ended.
20
KG 315 - K USB
