5 Operation
5.2.3
Changing rechargeable batteries / external recharging
To charge the rechargeable batteries the ribbed screw of the battery compartment must be loosened and the
compartment cover must be removed.
Rechargeable batteries can removed now. The batteries must inserted in the battery charger correctly as
shown in the battery chargers manual.
1.2 V
1.2 V
1.2 V
1.2 V
1.2 V
1.2 V
Rechargeable batteries
1.2 V; 2,100 mA; NiMH
+
–
Figure 3: Correct insertion of rechargeable batteries.
These drawing shows the infrared thermometer from the top side!
The identification plate is on the bottom side!
The recharged batteries must necessarily be filed with the correct polarity. The recharged batteries must
inserted like shown in Figure 3! Finally, the battery cover is closed again and tightened the thumbscrew.
5.2.4
Rechargeable battery test
The rechargeable battery test will be confirmed by pressing and holding the CONF
key.
Display at sufficient battery power:
0
Bat t7 . 2V
If the battery power is beneath 5.5 V it will be displayed as follows:
0
Bat t Low
The rechargeable batteries should be recharged or changed.
CAUTION:
Never use not rechargeable batteries !!
5.2.5
Clearing of storage
To initiate clearing press INIT
and SELECT
simultaneously.
Display:
0
In i t-T ?
Confirmation of clearing is done by pressing OK . Abortion of clearing is done by pressing SELECT
before
confirmation.
KG 315 - K USB
9
